Exhaust Emission Analyzer

home  >  Facilities  >   Exhaust Emission Analyzer

HORIBA MEXA-7100 DEGR

Category
Gaseous EM
Objectives
Gaseous emission analyzer
Specifications
•THC, CO, CO2, O2, NOx, EGR
•Response time : 900ms
•2 set

HORIBA MEXA-9100

Category
Gaseous EM
Objectives
Gaseous emission analyzer
Specifications
•THC, CO, CO2, O2, NOx, EGR
•Response time : 900 ms

Cambustion CLD 500

Category
Gaseous EM
Objectives
Fast NO / NOx analyzer
Specifications
•Measurement principle : Chemiluminescence
•Measurement range : 0-100ppm to 0-5,000ppm
•Response time: 2 ms
•Power supply : 100 – 240 VAC, 50/60 Hz
•Able to measure cycle by cycle NO emission

Cambustion HFR 500

Category
Gaseous EM
Objectives
•Real-time measurement of unburned hydrocarbon in exhaust
•Crank-angle-resolved measurement of hydrocarbon concentration near spark plug
Specifications
•Measurement principle : flame ionization
•Measurement range : 0-2000 to 0-1,000,000 ppmC1
•Response time : 0.9 ms
•Power supply : 100 – 240 VAC, 50/60 Hz
•2 channel simultaneous measurement

CONTINENTAL UNINOx

Category
Gaseous EM
Objectives
•Measurement for NOx-concentration and the lambda
Specifications
•Stand alone, multifunctional sensor
•Triple output signal : NOx, linear lambda, binary lambda
•Transfer rate : 250 kBaud
•Operating temperature : 100 to 800 ºC
•Accuracy
- NOx : at 100 ppm and 500 ppm : 10%, at 0 ppm : ± 10 ppm

CAMBUSTION DMS 500

Category
Particulate EM
Objectives
Fast response particulate size spectrometer for particulate emission characteristics
Specifications
•Measurement range : 5 nm to 1000 nm
•Response time : ~ 200 ms
•Capable of cold-cell testing
•Test cell integration via AK protocol

MDT

Category
Particulate EM
Objectives
PM sampling on the filters (6 EA)
Specifications
•Particulate Matter Partial Flow
•Dilution Measurement

PASS-100

Category
Particulate EM
Objectives
Real-time PM mass measurement
Specifications
Photo-acoustic Soot Spectrometer

AVL Smoke-meter

Category
Particulate EM
Objectives
•Particulate emission analyzer
•Steady-state PM mass measurement
Specifications
•Measured value output : FSN (Filter Smoke Number) or mg/m³ (soot concentration)
•Resolution : 0.001 FSN or 0.01 mg/m³
•Measurement range : 0 to 10 FSN
•Power supply : 100 – 115 VAC or 230 VAC, 50/60 Hz
•Power consumption : 700 VA
•2 set